2 i/o configuration – Festo Электромотор MTR-DCI User Manual
Page 116
5. Commissioning
5-28
Festo P.BE-MTR-DCI-PB-EN en 1209a
Icon files
In order to represent the MTR-DCI in your configuration soft-
ware use the following icon files:
Normal operating
status
Diagnostic case
Special operating
status
File:
mtrdci_n.dib or
mtrdci_n.bmp
File:
mtrdci_d.dib or
mtrdci_d.bmp
File:
mtrdci_s.dib or
mtrdci_s.bmp
Tab. 5/4: Icon files
Install GSD file and symbol files.
Depending on the configuration program used, install the
GSD file and the icon files with the aid of the appropriate
menu command or copy the files manually into a particular
directory of your programmer/PC.
5.5.2
I/O configuration
The GSD files support two alternative configurations:
–
“Festo handling and positioning profile standard”
GSD entry as “FHPP Standard”
8 bytes of I/O data, consistent transmission
–
“Festo handling and positioning profile with parameter
channel”
GSD entry as “FHPP Standard + FPC”
2 x 8 bytes of I/O data, consistent transmission