Festo Электромотор MTR-DCI - Manual (Page 76)

4. The control panel (type MTR-DCI-...-H2)
4-10
Festo P.BE-MTR-DCI-PB-EN en 1209a
[System paramet.] Menu command for displaying the following system para-
meters and data:
[System param] Description
V power [V] Supply voltage
I max [A] Maximum current
I act [A] Current current
Temp [°C] Operating temperature
Cycle Number of positioning movements
Ref. switch on/off Signal at reference switch input
Mode e.g. mm System of measurement units
Hom.meth. – bl.pos
– bl.neg
– sw.pos
– sw.neg
Fixed stop in positive direction
Fixed stop in negative direction
Reference switch in positive direction
Reference switch in negative direction
Gear e.g. 6.75 Gear reduction ratio of the MTR-DCI