Festo Электромотор MTR-DCI - Manual (Page 83)

Enter Password:
[?xx] =
ESC <Menu>
EDIT <--> OK <Enter>
New Password:
[?xx] =
ESC <Menu>
EDIT <--> OK <Enter>
4. The control panel (type MTR-DCI-...-H2)
4-17
Festo P.BE-MTR-DCI-PB-EN en 1209a
Modifying/deactivating the password
[Password] Select [Settings] [Password] in the menu:
Enter the existing password with 3 digits. The current entry
position is marked with a question mark.
1. Use the arrow keys to select a digit 0...9.
2. Confirm your entry with OK<Enter>. The next entry position
will be displayed.
3. Repeat the entry for the remaining entry positions.
4. Enter the new password with 3 digits. If you wish to
deactivate the password, enter “000”.
5. After entering the third digit, save your setting with SAVE
<Enter>.
• Store the password in an appropriate place, e.g. with the
internal documentation for your system.
If the active password in the MTR-DCI is lost in spite of care
being taken:
If needed, the password can be deleted by entering a master
password. In this case please contact your Festo Service
partner.