Festo Электромотор MTR-DCI - Manual (Page 72)

MTR-DCI...
X
a
= 0.00 mm
HMI:off PB:none
<Menu>
}
Diagnostic
Positioning
Settings
V
ESC <Menu>
<--> OK <Enter>
}
HMI control
LCD adjustment
v
ESC <Menu>
<--> OK <Enter>
4. The control panel (type MTR-DCI-...-H2)
4-6
Festo P.BE-MTR-DCI-PB-EN en 1209a
4.2 The menu system
4.2.1 Accessing the main menu
When the power supply is switched on, the MTR-DCI auto-
matically carries out an internal check. At first the display
briefly shows the Festo logo, then changes to the status dis-
play. The status display shows the following information:
– The type designation of your MTR-DCI
– The current position of the drive x a = ....
– The current setting for device control
(HMI = Human Machine Interface)
– The PROFIBUS address of the MTR-DCI (PB:...).
The main menu is accessed from the status display using the
<Menu> button. The current button function will be displayed
in the lower lines of the LCD display.
Function Button
<- -> You can use the arrow keys on the control panel
to select a menu item from the list. The current
selection is marked with an arrow (
} Diagnos-
tic). Select the menu item V in order to display
further menu items (HMI control...).
v
V
ESC With <Menu> you can interrupt the current entry
and return in stages to the higher menu level or
status display.
Menu
OK With<Enter> you can confirm the current selection
or entry.
Enter
Tab. 4/2: Button function (menu selection)