Device control – Festo Электромотор MTR-DCI User Manual
Page 94
Advertising
Diagnostic
Positioning
Settings
}
HMI control
LCD adjustment
5. Commissioning
5-6
Festo P.BE-MTR-DCI-PB-EN en 1209a
5.2
Commissioning with the control panel (only MTR-DCI-...-H2)
Information on the button functions and on the menu com-
position of the control panel can be found in Chapter 4.
Device control
In order that the control panel can control the connected
MTR-DCI, the control interface of the MTR-DCI must be deac-
tivated and control panel enable must be set [HMI = on]. The
actual status of the ENABLE control bit then has no effect.
•
Select [HMI control] = “on” and then OK <Enter>.
Advertising