Festo Электромотор MTR-DCI - Manual (Page 117)

5. Commissioning
5-29
Festo P.BE-MTR-DCI-PB-EN en 1209a
5.5.3 Configuration with STEP 7
General information
The Simatic Manager software package is used for project
planning and commissioning in conjunction with PROFIBUS
masters from Siemens or compatible masters. In order to
understand this section, you should be sure of how to handle
your configuration program. If necessary, refer to the docu-
mentation for the Simatic Manager. This manual refers to soft-
ware version V 5.3.
An appropriate device master file (GSD file) for the MTR-DCI
must be installed for configuration.
With the STEP 7 Hardware Configurator you can load the files
via the menu command [Options] [Install GSD file] in the
“HW Config.” dialogue window.
Configuration
program File type Directory
STEP 7 Hardware
Configurator
1)
GSD file ...\STEP7\S7DATA\GSD
Bitmap files ...\STEP7\S7DATA\NSBMP
1) If you copy the GSD files when the Simatic Manager has already been started, you can update the
hardware catalogue with the command [Options] [Update Catalog].
Tab. 5/5: Folder for GSD and icon files in STEP 7