Festo Электромотор MTR-DCI - Manual (Page 79)

4. The control panel (type MTR-DCI-...-H2)
4-13
Festo P.BE-MTR-DCI-PB-EN en 1209a
[Axis type] Type of axis driven by the MTR-DCI (for parameters see
section 5.2.1)
[Axis type] Description
[Type DMES-...] Festo servo axis
[Type DNCE-...] Festo electrical drive
[Rotation drive] Any rotational axis
[User config] Any linear axis
[Save...] Save parameters in EEPROM
[Axis parameter] Teach mode for setting the axis parameters
[Axis param] Description
[Zero point] Offset of the axis zero point
[Abs.min.pos] Stroke limitation: software limit switch,
negative
[Abs.max.pos] Stroke limitation: software limit switch,
positive
[Save...] Save parameters in EEPROM