A.1 technical data – Festo Электромотор MTR-DCI User Manual
Page 193
![background image](/manuals/464458/193/background.png)
A. Technical appendix
A-3
Festo P.BE-MTR-DCI-PB-EN en 1209a
A.1
Technical data
General information
Protection class as per EN 60529
IP54 (plug connectors plugged in or fitted with
protective cap)
Relative humidity
0...95 %, non-condensing
Temperature range
Operation: 0 ... +50 °C
Storage/transport: -25 ... +60 °C
Vibration
As per DIN/IEC 68/EN 60068 Part 2-6,
severity level 1
Shock
As per DIN/IEC 68/EN 60068 Part 2-27,
severity level 1
Electromagnetic compatibility (EMC)
1)
See declaration of conformity (www.festo.com)
Protection against electric shock
(protection against direct and indirect contact
as per IEC/DIN EN 60204-1)
By means of PELV power circuit
(Protected Extra-Low Voltage)
Gearing type
Planetary gearing
Encoder (with 4x evaluation)
500 x 4 —> 2000 inc/revolution
MTR-DCI-32: 300 x 4 —> 1200 inc/revolution
Temperature monitoring
Warning message at 70 °C < T < 80 °C
Switch off at temperature ≥ 80 °C
Display resolution
128 x 64 pixels
Serial interface
RS232, 9600 bit/s
PROFIBUS interface
IEC 61158. DPV0 and DPV1.
1)
The device is intended for industrial use.