Festo Электромотор MTR-DCI - Manual (Page 74)

} Diagnostic
}
Pos.set table
Axis parameter
System paramet.
PROFIBUS Diag
SW information
4. The control panel (type MTR-DCI-...-H2)
4-8
Festo P.BE-MTR-DCI-PB-EN en 1209a
4.3 [Diagnostic] menu
In order to display the system data and the currently effective
settings:
1. Use the arrow keys to select [Diagnostic] from the main
menu and press the <Enter> button.
2. Select one of the following menu commands:
– Position set table [Pos. set table]
– Axis parameters [Axis parameter]
– System parameters [System paramet.]
– PROFIBUS diagnostic data [PROFIBUS Diag]
– Firmware version for the MTR-DCI [SW information]
Function Button
<- -> You can scroll through the diagnos-
tic data with the arrow keys.
v V
ESC With <Menu> you can return to the
higher menu level.
Menu