Festo Электромотор MTR-DCI - Manual (Page 115)

5. Commissioning
5-27
Festo P.BE-MTR-DCI-PB-EN en 1209a
5.5 Configuration
5.5.1 Install device master file (GSD file) and icon files.
If a new hitherto unknown device is to be incorporated in a
configuration program when a PROFIBUS-DP system is to be
configured, an appropriate device master file (GSD file)
must be installed for this device. The device master file con-
tains all the necessary information for the configuration pro-
gram. You will require the appropriate icon files for repre-
senting the device graphically.
Reference sources The enclosed documentation CD contains GSD files and icon
files for the MTR-DCI in the “PROFIBUS” folder.
Current GSD files and icon files can be found on the Festo
Internet pages at:
– www.festo.com/download/
GSD file You will require one of the following GSD files for the
MTR-DCI:
– mtr_0974.gsd – English
mtr_0974.gsg – German
(with DPV0
and DPV1 support)
– mtr00974.gsd – English
mtr00974.gsg – German
(only for older control systems/
without DPV1 support)