1 composition and function of the control panel – Festo Электромотор MTR-DCI User Manual
Page 70
4. The control panel (type MTR-DCI-...-H2)
4-4
Festo P.BE-MTR-DCI-PB-EN en 1209a
4.1
Composition and function of the control panel
The control panel enables commissioning directly on the
MTR-DCI with the following functions:
–
Parameter assignment and referencing the axis (homing)
–
Entering position set records
–
Test functions e.g. for moving to individual position set
records
1
LCD display
2
Operating
buttons
3
LEDs
– Power (green)
– I/F (green/red)
– Error (red)
1
3
2
Fig. 4/1:
Control panel of the MTR-DCI-...-H2
With the 4 buttons on the control panel you can carry out all
operating functions and settings by means of menus. The
graphical LCD display shows all texts in English. The display
can be rotated in 90° steps; see menu command [LCD adjust-
ment].
The operating statuses are indicated visually by 3 LEDs
(see also section 6.2).
–
Power:
Power supply
–
I/F:
Communication status (red),
positioning status (green)
–
Error:
Faults