Festo Электромотор MTR-DCI - Manual (Page 87)

4. The control panel (type MTR-DCI-...-H2)
4-21
Festo P.BE-MTR-DCI-PB-EN en 1209a
Function
EMERG.
STOP With<Menu> you can interrupt the positioning
procedure (
> Error mode EMERG.STOP;
confirm with <Enter>, then automatic return to
the status display).
Menu
DEMO
STOP With <Enter> you can interrupt the “Position
set table” positioning run [Demo posit tab] .
The current positioning set will be executed
before the axis stops. If you restart, the run
will begin with record 0.
Enter