Festo Электромотор MTR-DCI - Manual (Page 113)

5. Commissioning
5-25
Festo P.BE-MTR-DCI-PB-EN en 1209a
Instructions on parameter assignment and
commissioning
FCT framework Information on working with projects and adding a device to a
project can be found in the Help for the FCT framework, using
the command [Help] [Contents FCT General].
MTR-DCI plugin The MTR-DCI plugin for the FCT supports all the steps necess-
ary for commissioning an MTR-DCI. You can assign any re-
quired parameters offline, i.e. without the MTR-DCI being
connected to the PC. This enables preparation for the actual
commissioning e.g. in the design office when planning a new
system.
Further information can be found in the plugin help: Com-
mand [Help] [Contents of installed plugins] [Festo (manufac-
turer name) ] [MTR-DCI (plugin name) ], e.g.:
– For describing the dialogues of the “Device MTR-DCI”
– For describing the work steps for commissioning
– For the basic functions: Device connection, Device names
and Device control, and for password protection