Festo Электромотор MTR-DCI - Manual (Page 177)

6. Diagnostics and fault display
6-5
Festo P.BE-MTR-DCI-PB-EN en 1209a
6.2 LED status displays
Power supply
POWER Status
Load and logic voltages applied.
Green
Logic voltage is applied.
Load voltage is
not applied.
Flashing
No voltage is applied.
Off
Tab. 6/3: “Power” LED
Fault display
ERROR Status
Fault.
The motor unit is not ready to operate.
Red
Warning.
Check cause and rectify if necessary; see section 6.3.
Flashing
No internal fault reported.
Off
Tab. 6/4: “Error” LED