Festo Электромотор MTR-DCI - Manual (Page 178)

6. Diagnostics and fault display
6-6
Festo P.BE-MTR-DCI-PB-EN en 1209a
Bus status, positioning status and controller enable
I/F
1)
Status
MC (green)
ON
OFF Motion Complete 1)
– Positioning procedure has been com-
pleted or stopped (Motion Complete).
Lit up green
ON
OFF No Motion Complete or fault/warning
– Target position not yet reached (posi-
tioning procedure is running)
2)
or
– Fault.
Off
1) Two-colour LED
2) If there is no fault, i.e. LED ERROR = off.
Tab. 6/5: LED “I/F” – green Motion-Complete LED
I/F
1)
Status
PROFIBUS (red)
ON
OFF Data exchange active
– Normal operating status.
Off
ON
OFF Address not parameterised
– Invalid bus address set.
Flashing red fast (5Hz)
ON
OFF Waiting for connection
Flashing red slowly (1Hz)
1) Two-colour LED
Tab. 6/6: LED “I/F” – red PROFIBUS LED