Festo Электромотор MTR-DCI - Manual (Page 9)

Contents and general safety instructions
VII
Festo P.BE-MTR-DCI-PB-EN en 1209a
Intended use
The MTR-DCI-... motor unit is an intelligent servo motor con-
sisting of DC motor, planetary gear, encoder and inte-
grated control electronics. Positioning functions are charac-
terised by high torques at low speeds.
The MTR-DCI has been optimised for use with Festo axes
(e.g. DMES-... or DNCE-...).
This description deals with the basic logic functions of the
MTR-DCI and the Profibus interface.
The MTR-DCI and the connectable modules and cables may
only be used as follows:
– As intended
– In industrial applications
– In perfect technical condition
– In their original state without unauthorised modifications
(with the exception of the conversions or modifications
described in the documentation supplied with the product)
• Observe the safety instructions and intended use in the
documentation for all the components and modules.
• Observe the standards specified throughout, as well as
the regulations of the trade associations, the Technical
Inspection Association (TÜV), the Association of German
Electricians (VDE) or relevant national regulations.
• Observe the limit values of all additional components
(e.g. sensors, actuators).