3 bus termination – Festo Электромотор MTR-DCI User Manual
Page 66
Advertising
3. Installation
3-18
Festo P.BE-MTR-DCI-PB-EN en 1209a
3.6.3
Bus termination
Note
If the MTR-DCI-...-PB is at the beginning or end of the field-
bus segment, a bus termination will be required.
•
Fit a bus termination resistor to both ends of a bus seg-
ment.
If the fieldbus adapter FBA-... is used (see chapter A.2 “Acces-
sories”), a conventional terminating resistor can be con-
nected to the connection for fieldbus continuation
2.
1
2 3
1
Fieldbus connection
2
Continuation of the fieldbus or terminating resistor
3
Supply of separate logic voltage
For the pin allocation and connection specification, see the
installation manual of the fieldbus adapter.
Advertising