Yaskawa MP920 User's Manual Design - Manual (Page 219)

5 Modules
5.3.2 DO-01 Output Module
5-24
5.3.2 DO-01 Output Module
The following illustration shows the appearance of the DO-01 Output Module.
The details of each part of the DO-01 Module are described below.
„ LED Indicators
„ External I/O Connector
Indicator Name Indicator Color Meaning
RUN Green Lit: When the Output Module is mounted
in a slot and operating normally
Unlit: When the Output Module is
stopped
FUSE Red Lit: When the output fuse is blown
The external I/O connector is used to connect a DO-01 Module to
external output signal terminals.
Use the following cable for this connector.
• JEPMC-W6060-††
Number of output points: 64 points (32 points × 2)
External output
signal connector 1
LED indicators
External output
signal connector 2
RUN
FUSE