Yaskawa MP920 User's Manual Design - Manual (Page 258)

5.4 Analog Modules
5-63
5
5.4.2 AO-01 Analog Output Module
The following illustration shows the appearance of the AO-01 Analog Output Module.
The dedails of each part of the AO-01 Module are described below.
„ LED Indicator
The meaning of the indicator on the front panel of the Module is as follows:
„ Analog Output Connectors
The use of the external input connectors are shown below.
Indicator Name Indicator Color Meaning when Indicator Is Lit
RUN Green Lit: The AO-01 Module is mounted to
the slot and is operating normally.
Not lit: The AO-01 Module is stopped.
The CN1 connector is used to connect an AO-01 Module to external
devices. Use the following standard cable for this connector.
• JEPMC-W6090-††
Number of input channels: 4
LED indicator
Analog output connector CN1
RUN
CN1