Yaskawa MP920 User's Manual Design - Manual (Page 345)

6.2 System Startup Procedure
6-15
6
2. In the dialog box, input the order folder name and click the OK button. The order folder
name must be eight characters or less.
The new “TESTPLC” order folder will be created.
„ Creating a Controller Folder
Register the new Controller to be used to create the program.
• Example: Controller name: XY-TABLE
Controller type: MP920
1. Point to the TESTPLC order folder, right click, and then click Make New Folder (N) →
Controller Folder (C).