2 servo module (2-axis), Led indicator – Yaskawa MP920 User's Manual Design User Manual
Page 281
Advertising
5 Modules
5.5.2 Servo Module (2-axis)
5-86
5.5.2
Servo Module (2-axis)
The following illustration shows the appearance of the SVA-02A Two-axis Servo Module.
The details of each part of the SVA-02A Module are described below.
LED Indicator
The STATUS indicator is a 7-segment LED indicator that displays the RUN/error status of
the SVA-02A Module.
The table below shows the indicator display patterns.
Servo interface
connector CN1
Servo interface
connector CN2
LED indicator
1LED
24-V input connector
CN3
STATUS
Display
Category
Meaning
Hardware reset
The SVA-02A Module is in hardware reset status.
Initializing
This display appears one to six seconds after the
SVA-02A Module is turned ON or reset.
Advertising