Yaskawa MP920 User's Manual Design - Manual (Page 44)

2 MP920 Specifications and System Configuration
2.1.2 Hardware Specifications
2-18
„ 218I/F Communications Module (218IFA)
Table 2.16 shows the specifications of the 218IFA Communications Module.
Table 2.16 Specifications of the 218IF Communications Module
Item Specifications
Hardware
Specifications Name 218IF Communications Module (Ethernet Communications
Module)
Model Number JEPMC-CM210A
Description 218IFA
Dimensions (mm) 40 × 130 × 105 (W × H × D)
Occupies one MP920 option slot.
Mass Board: 220 g, case: 220 g
Communications
Specifications Interface 10Base-T: RJ-45
Transmission
Distance Total length : 500 m (yellow cable) via 10Base5
Baud Rate 10 Mbps
Access Mode IEEE 802.3 CSMA/CD
Frames Ethernet, Ver.2 (DIX specifications)
Connections TCP/UDP/IP/ARP
Max. Number of
Nodes Depends on applicable HUB or network.
Communications
Modes Message communication
Max. Number of
Transmission Words 512 words (1,024 bytes)
Communications
Protocol MEMOBUS (Master/Slave), MELSEC
Max. Number of
Connections 20
(max.10 connections for simultaneous communications. 20
connections can be used by switching the connections using
the main program.)