Yaskawa MP920 User's Manual Design User Manual
Page 437
Advertising
9 Multi-CPU System
9.2.2 Setup Procedure Using the MPE720
9-10
1. Creating an Order Folder
The procedure is the same as for a Single-CPU System.
2. Creating a PLC Folder
Select MP920 or MP920-02 for the Controller Type on the Information Tab Page of the
Controller Configuration Window to activate the Multi-CPU settings. Select the
Enable Option.
A CPU1 folder for CPU Module 1 and a CPU2 folder for CPU Module 2 will be created
in the specified PLC folder.
Fig. 9.7 Controller Configuration Window
Advertising