Yaskawa MP920 User's Manual Design - Manual (Page 227)

5 Modules
5.3.3 LIO-01 I/O Module
5-32
5.3.3 LIO-01 I/O Module
The following illustration shows the appearance of the LIO-01 I/O Module.
The details of each part of the LIO-01 Module are described below.
„ LED Indicators
The meanings of the indicators on the front panel of the Module are as follows:
„ External I/O Connectors
Indicator Name Indicator Color Meaning when Indicator Is Lit
RUN Green Lit: The LIO-01 Module is mounted to
the slot and is operating normally.
Not lit: The LIO-01 Module is stopped.
FUSE Red Lit: The output fuse is blown.
The connector is used to connect an LIO-01 Module to I/O signals.
Use the following standard cable for this connector.
• JEPMC-W6060-††
Number of input points: 32 (8 points per common)
Input type: Combined sourcing and sinking
Number of output points: 32 (8 points per common)
Output type: Sinking
Connect 16 inputs and 16 outputs to each of the connectors CN1 and
CN2.
External I/O signal
connector 1
(16 inputs, 16 outputs)
External I/O signal
connector 2
(16 inputs, 16 outputs)
LED indicators
RUN
FUSE