Yaskawa MP920 User's Manual Design - Manual (Page 349)

6.2 System Startup Procedure
6-19
6
3. To select the rack kind, click the button on the right side of Rack 1 and then click
Short.
4. Use the following procedure to select the Modules that are mounted to Rack 1.
The following table shows the Modules allocated to each slot.
a) To allocate the MP920 Module to slots 0 and 1, click the button on the right side of
Module No. 00 and then click MP920.
b) To allocate the SVA-01A Module to slots 2 and 3, click the button on the right side
of Module No. 02 and then click SVA-01.
Slot
0, 1 2, 3 4 5
MP920 SVA-01A DI-01 DO-01