4 pulse output module (po-01), Led indicator – Yaskawa MP920 User's Manual Design User Manual
Page 300
Advertising
5.5 Motion Modules
5-105
5
5.5.4
Pulse Output Module (PO-01)
The following illustration shows the appearance of the PO-01 Pulse Output Module.
The details of each part of the PO-01 Module are described below.
LED Indicator
The STATUS indicator is a 7-segment LED indicator that displays the RUN/error status of
the PO-01 Module.
The table below shows the LED indicator display patterns.
Connector 1
CN1
Connector 2
CN2
LED indicator
STATUS
STATUS
Display
Category
Meaning
Hardware reset
The PO-01 Module is in hardware reset status.
Initializing
This display appears one to six seconds after the
PO-01 Module is turned ON or reset.
Advertising