3 mechatrolink interface module (svb-01), Led indicator 1 – Yaskawa MP920 User's Manual Design User Manual
Page 292
Advertising
5.5 Motion Modules
5-97
5
5.5.3
MECHATROLINK Interface Module (SVB-01)
The following illustration shows the appearance of the SVB-01 MECHATROLINK Inter-
face Module.
The details of each part of the SVB-01 Module are described below.
LED Indicator 1
The STATUS indicator is a 7-segment LED indicator that displays the RUN/error status of
the SVB-01 Module.
The table below shows the indicator display patterns.
LED indicator 1
LED indicator 2
MECHATROLINK
connector
STATUS
Display
Category
Meaning
Hardware reset
The SVB-01 Module is in hardware reset status.
Initializing
This display appears one or six seconds after the
SVB-01 Module is turned ON or reset.
Advertising