Yaskawa MP920 User's Manual Design - Manual (Page 500)

12 Troubleshooting
12.2.4 System Register Configuration
12-10
Software
Switch
Selection
Status SW00047 SB000470 Startup mode in case of
power interruption 0: New startup, 1: Continued startup
SB000471
SB000472 Reserved by system. (Not used)
SB000473 Program WRITE selection 0: WRITE enabled, 1: WRITE disabled
SB000474 Startup mode in case of
ordinary power interrup-
tion 0: New startup, 1: Continued startup
SB000475 Reserved by system. (Not used)
SB000476 to
SB00047F Reserved by system. (Not used)
Hardware
Status
Configuration SW00048 SB000480 RUN DIP switch report
0: ON
1: OFF
SB000481 INIT
SB000482 TEST
SB000483 −
SB000484 MULTI
SB000485 FLASH
SB000486 −
SB000487 Battery alarm 1: Battery alarm
Reserved by
System SW00049 SB000490 to
SB00049F Reserved by system. (Not used)
Table 12.1 System Status List (cont’d)
Name Register
No.
Contents