Lenze 8400 motec - Manual (Page 123)

Lenze · 8400 motec · Reference manual · DMS 4.1 EN · 08/2013 · TD05 123
5 Motor control (MCTRL)
5.8 Sensorless vector control (SLVC)
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
5.8.1 Parameterisation dialog

Proceed as follows to open the dialog for parameterising the motor control:
1. »Engineer« Go to the Project view and select the 8400 motec controller.
2. Select the Application parameters tab from the Workspace.
3. Select the motor control "4: SLVC: Vector control" from the Overview dialog level in the
Motor control list field:
4. Click the Motor control vector button to change to the Overview  Motor control vector
dialog box.
• This dialog level lists shows all relevant parameters in a parameter list.
Short overview of the relevant parameters:
Parameter Info
C00006 Selection of the motor control
 "4: SLVC: Vector control"
C00011 Reference speed
C00018 Switching frequency
C00021 Slip compensation
C00022 Imax in motor mode
C00023 Imax in generator mode
C00050 Speed setpoint
C00057 Maximum torque
C00058 Output frequency
C00081 Rated motor power
C00084 Motor stator resistance
C00085 Motor stator leakage inductance
C00087 Rated motor speed
C00088 Rated motor current
C00089 Rated motor frequency
C00090 Rated motor voltage
C00091 Motor cosine phi
C00092 Motor magnetising inductance
C00095 Motor magnetising current
C00097 Rated motor torque
C00105 Decel. time - quick stop
C00909/1 Max. pos. speed
C00909/2 Max. neg. speed
C00910/1 Max. pos. output frequency
C00910/2 Max. neg. output frequency
Highlighted in grey = display parameter