Lenze 8400 motec - Manual (Page 319)

Lenze · 8400 motec · Reference manual · DMS 4.1 EN · 08/2013 · TD05 319
10 Communication
10.2 Selection of the communication in the »Engineer«
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
10.2 Selection of the communication in the »Engineer«
If you insert the 8400 motec controller via the Insert a component dialog into the Project view of the
»Engineer«, you will be queried in the second dialog step Device modules about the communication
option in the device.

Select the communication option in the list field according to the available communication
unit in order that the related configuration parameters & parameterisation dialogs are
available in the »Engineer«.

Tip!
The available communication option can also be assigned subsequently to the device in the
»Engineer« any time:
1. Go to the Project view and select the 8400 motec controller.
2. Click the icon.
3. Select the available communication option in the Insert device modules dialog box..
4. Press Complete to confirm your selection.