Lenze 8400 motec - Manual (Page 428)

11 Parameter reference
11.2 Parameter list | C02870
428 Lenze · 8400 motec · Reference manual · DMS 4.1 EN · 08/2013 · TD05
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
C02870
C02871
C02872
C02873
C02874
C02875
Parameter | Name:
C02870 | PLI without motion: Optimisation factor
Data type: INTEGER_16
Index: 21705 d = 54C9 h
This code is for device-internal use only and must not be written to by the user!
Parameter | Name:
C02871 | PLI without motion: Running time
Data type: INTEGER_16
Index: 21704 d = 54C8 h
This code is for device-internal use only and must not be written to by the user!
Parameter | Name:
C02872 | PLI without motion: Adaptation of time duration
Data type: INTEGER_8
Index: 21703
d
= 54C7
h
This code is for device-internal use only and must not be written to by the user!
Parameter | Name:
C02873 | PLI without motion: Ident. el. rotor displ. angle
Data type: INTEGER_16
Index: 21702
d
= 54C6
h
This code is for device-internal use only and must not be written to by the user!
Parameter | Name:
C02874 | PLI without motion
Data type: UNSIGNED_16
Index: 21701 d = 54C5 h
This code is for device-internal use only and must not be written to by the user!
Parameter | Name:
C02875 | PLI without motion: Adaptation of ident angle
Data type: INTEGER_8
Index: 21700 d = 54C4 h
This code is for device-internal use only and must not be written to by the user!