Lenze 8400 motec - Manual (Page 208)

7 Technology applications
7.2 TA "Actuating drive speed"
208 Lenze · 8400 motec · Reference manual · DMS 4.1 EN · 08/2013 · TD05
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Setpoint generator
• For a detailed functional description see FB L_NSet_1 .
bSetSpeedCcw
BOOL
C00701/5
Change of direction of rotation
• For instance if a motor or gearbox is fixed laterally reversed to a machine part, but
the setpoint selection should still be executed for the positive direction of
rotation.
FALSE Clockwise rotation (Cw)
TRUE Direction of rotation to the left (Ccw)
bJogSpeed1
bJogSpeed2
BOOL
C00701/6
C00701/7
Selection inputs for fixed changeover setpoints (JOG setpoints) for the main setpoint
• A fixed setpoint for the setpoint generator can be activated instead of the main
setpoint via these selection inputs.
• The two selection inputs are binary coded, therefore you can select three fixed
setpoints.
• In the case of binary coded selection "0" (all inputs = FALSE or not assigned), main
setpoint nMainSetValue_a is active.
• The selection of the fixed setpoints is carried out in C00039/1...3 in [%] based on
the reference speed ( C00011 ).
• For a detailed functional description see FB L_NSet_1 .
bRFG_0
BOOL
C00701/12
Ramp function generator: Lead the main setpoint integrator to "0" within the
current Ti times
• For a detailed functional description see FB L_NSet_1 .
TRUE The current value of the main setpoint integrator is led to "0" within
the Ti time set.
Motor potentiometer
Alternatively to the input signal nMainSetValue_a, the main setpoint can also be generated by a motor
potentiometer function.
• In the Lenze setting, the motor potentiometer function is deactivated.
• Activation is possible via C00806 or via the bMPotEnable input.
• The behaviour of the motor potentiometer during switch-on of the drive system can be selected in C00805 .
• For a detailed functional description see FB L_MPot_1 .
bMPotUp
BOOL
C00701/8
Increasing the speed setpoint
TRUE Approach the upper speed limit value set in C00800 with the
acceleration time set in C00802 .
bMPotDown
BOOL
C00701/9
Decreasing the speed setpoint
TRUE Approach the lower speed limit value set In C00801 with the
deceleration time set in C00803 .
bMPotInAct
BOOL
C00701/10
Activating the inactive function
TRUE The speed setpoint behaves according to the inactive function set in
C00804 .
• In the Lenze setting, the speed setpoint is maintained.
bMPotEnable
BOOL
C00701/11
Activating the motor potentiometer function
• This input and C00806 are OR'd.
TRUE The motor potentiometer function is active; the speed setpoint can
be changed via the bMPotUp and bMPotDown control inputs.
Identifier
Data type
Configuration parameters
Information/possible settings