5motor control (mctrl) – Lenze 8400 motec User Manual
Page 175
Advertising
Lenze · 8400 motec · Reference manual · DMS 4.1 EN · 08/2013 · TD05
175
5
Motor control (MCTRL)
5.14
Monitoring
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Tip!
• If forced ventilated motors are used, a premature response of the overload threshold can
be avoided by deactivating this function if necessary (
= "0: No Reaction").
and
influence the I
2
xt calculation only in an
indirect way. However, the operation of the motor at maximum possible load can be
Defining current and speed limits
Note!
If the motor is operated by two drives with different rated currents, an adapted value has
to be entered into
.
Advertising