Lenze 8400 motec - Manual (Page 183)

Lenze · 8400 motec · Reference manual · DMS 4.1 EN · 08/2013 · TD05 183
6 I/O terminals
6.1 Digital terminals
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Parameterisation dialog in the »Engineer«
• The representation in the »Engineer« and the possible settings depend on the communication
unit used.
• The following illustration displays exemplarily all optional terminals:
Button Function
Indicates the polarity of the input is HIGH active.
The polarity can be changed from HIGH active to LOW active by clicking this button.
Indicates that the polarity of the input is LOW active.
The polarity can be changed from LOW active to HIGH active by clicking this button.
Open the parameterisation dialog for assigning application inputs to the digital input.
 Changing the terminal assignment with the »Engineer« ( 193)