Lenze 8400 motec - Manual (Page 343)

Lenze · 8400 motec · Reference manual · DMS 4.1 EN · 08/2013 · TD05 343
11 Parameter reference
11.2 Parameter list | C00056
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
C00056
C00057
C00058
C00059
C00061
Parameter | Name:
C00056 | Torque
Data type: INTEGER_32
Index: 24519 d = 5FC7 h
Display of the current torque
Display range
(min. value | unit | max. value)
-320.00 Nm 320.00
Subcodes Info
C00056/1 Torque demand
• Only in case of sensorless vector control ( SLVC ).
C00056/2 Actual torque value
• Estimated actual torque for all motor control modes.
 Read access  Write access  CINH  PLC STOP  No transfer  COM  MOT Scaling factor: 100
Parameter | Name:
C00057 | Maximum torque
Data type: UNSIGNED_32
Index: 24518 d = 5FC6 h
Display of the maximum torque to be generated by the motor
• The maximum torque to be generated by the motor depends on various factors, e.g. on Imax in motor mode
( C00022 ) and the motor type used.
Display range (min. value | unit | max. value)
0.00 Nm 320.00
 Read access  Write access  CINH  PLC STOP  No transfer  COM  MOT Scaling factor: 100
Parameter | Name:
C00058 | Output frequency
Data type: INTEGER_32
Index: 24517 d = 5FC5 h
Display of the current output frequency
Display range
(min. value | unit | max. value)
-655.0 Hz 655.0
 Read access  Write access  CINH  PLC STOP  No transfer  COM  MOT Scaling factor: 100
Parameter | Name:
C00059 | Appl.: Reference frequency C11
Data type: UNSIGNED_32
Index: 24516 d = 5FC4 h
Display of the field frequency which corresponds to the reference speed set in C00011 .
Display range (min. value | unit | max. value)
0.0 Hz 999.9
 Read access  Write access  CINH  PLC STOP  No transfer  COM  MOT Scaling factor: 100
Parameter | Name:
C00061 | Heatsink temperature
Data type: INTEGER_16
Index: 24514 d = 5FC2 h
Display of the current heatsink temperature
Display range
(min. value | unit | max. value)
-50 °C 150
 Read access  Write access  CINH  PLC STOP  No transfer  COM  MOT Scaling factor: 1