Lenze 8400 motec - Manual (Page 78)

4 Device control (DCTRL)
4.3 Auto-start option "Inhibit at power-on"
78 Lenze · 8400 motec · Reference manual · DMS 4.1 EN · 08/2013 · TD05
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
4.3 Auto-start option "Inhibit at power-on"
prevents in the Lenze setting the auto-start option "Inhibit at power-on" activated in C00142 " from
changing to the " SwitchedOn " state.
The following three cases describe the behaviour of the controller after mains connection depend-
ing on whether the controller is enabled and the set auto-start option. Here, it is assumed that after
mains connection, no errors and trouble occur in the controller and the "EnableOperation" control
bit in the wDriveControl is set to "1".

Danger!
When the auto-start option "Inhibit at power-on" is deactivated, the motor can directly
start after power-on if the controller is enabled!