Lenze 8400 motec - Manual (Page 452)

12 Function library
12.3 L_PCTRL_1
452 Lenze · 8400 motec · Reference manual · DMS 4.1 EN · 08/2013 · TD05
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Parameter
Parameter Possible settings Info
C00222 0.1 500.0 Gain Vp
• Lenze setting: 1.0
C00223 20 ms 6000 Reset time Tn
• Lenze setting: 400 ms
C00224 0.0 5.0 Differential component Kd
• Lenze setting: 0.0
C00225 -199.9 % +199.9 Maximum value of the PID operating
range
• Lenze setting: 199.9 %
C00226 -199.9 % +199.9 Minimum value of the PID operating
range
• Lenze setting: -199.9 %
C00227 0.0 s 999.9 Acceleration time for the ramp at the
PID output (should be set as steep as
possible)
• Lenze setting: 0.1 s
C00228 0.0 s 999.9 Deceleration time for the ramp at the
PID output
• Lenze setting: 0.1 s
C00231/1 (Pos. Maximum)
C00231/2 (Pos. Minimum)
C00231/3 (Neg. Minimum)
C00231/4 (Neg. Maximum)
0.0 % 199.9 Operating range
• Determination of the operating
range for the PID process
controller by limiting the input
signal nSet_a.
• Lenze setting: No limitation (-
199.9 % ... +199.9 %)
C00233
(from version 04.00.00)
Root function
• Lenze setting: "0: Off"
0 Off The actual value at nAct_a is not
changed for further processing.
1 On The square root of the actual value at
nAct_a is taken for further
processing.