Lenze 8400 motec - Manual (Page 481)

Lenze · 8400 motec · Reference manual · DMS 4.1 EN · 08/2013 · TD05 481
12 Function library
12.14 LS_Convert_2
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
12.14 LS_Convert_2
This function extension is available from version 05.00.00!
This FB serves to execute various conversions/scalings.
• The SB is used in the "AC Drive Profile" application for converting the torque values received and
to be sent via bus (see AC Drive Profile  Internal signal flow ).
• The first path (In1  Out1) is used to convert the torque setpoint for the application.
• The second path (In2  Out2) is used to convert the actual torque value from the application
for the output on the bus.
• The SB can also be used for migrating an 8200 motec project into other applications.
Inputs
Outputs
Parameter
Identifier
Data type
Information/possible settings
In1 Input signal 1
In2 Input signal 2
Identifier
Data type
Value/meaning
Out1 Output signal 1
Out2 Output signal 2
Parameter Possible settings Info
C01353/2 -128 127 ACDrive: Torque scaling
C01354/2 Function selection
0 1 ==> 1 ==> 1 See subchapter " Conversion
formulae "
1 1 Hz ==> % (C11) ==> 1 Hz
... ...
16 0.001 Nm ==> % (C57) ==> 0.001 Nm
17 ACDP ==> CAN ==> ACDP
For converting the AC Drive Profile
control word and status word
18 x C471_1 / C471_2 Parameterisable conversion
19 Act position 32bit ==> 16Bit See description of FB L_Convert_1.
 Function 19: Counting and
providing external encoder pulses
/6B&RQYHUWB
&
&
&RQILJXUDWLRQSDUDPHWHUV
  /6B&RQYHUWB 2XW
(QWU\LQVHOHFWOLVW
  /6B&RQYHUWB 2XW
,Q 2XW
,Q
& )XQFWLRQ
2XW
& $&'ULYH 7RUTXHVFDOLQJ