3commissioning – Lenze 8400 motec User Manual
Page 53
Advertising
Lenze · 8400 motec · Reference manual · DMS 4.1 EN · 08/2013 · TD05
53
3
Commissioning
3.7
PC manual control
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
PC manual control - operator dialog
The PC manual control operator control serves to simply make the drive rotate in the "speed
follower" mode without the need to set control parameters or feedback systems.
Note!
PC manual control can be exited any time by clicking the Close button.
If you exit PC manual control, the controller is inhibited via device command (
), i.e. the motor gets torqueless and is coasting unless it already is at standstill.
Advertising