Lenze 8400 motec - Manual (Page 356)

11 Parameter reference
11.2 Parameter list | C00142
356 Lenze · 8400 motec · Reference manual · DMS 4.1 EN · 08/2013 · TD05
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
C00142
Parameter | Name:
C00142 | Auto-start option
Data type: UNSIGNED_8
Index: 24433 d = 5F71 h
Starting performance of the controller after mains connection and reset of "Trouble" or "Fault".
 Auto-start option "inhibit at power-on"
Setting range (min. hex value | max. hex value) Lenze setting
0x00 0xFF 0x01 (decimal: 1)
Value is bit-coded: ( = bit set)
Bit 0  Inhibit at mains ON
Bit 1  Inhibit at trouble
Bit 2  Inhibit at fault
Bit 3  Reserved
Bit 4  Reserved
Bit 5  Reserved
Bit 6  Reserved
Bit 7  Reserved
 Read access  Write access  CINH  PLC STOP  No transfer  COM  MOT