Lenze 8400 motec - Manual (Page 269)

Lenze · 8400 motec · Reference manual · DMS 4.1 EN · 08/2013 · TD05 269
8 Basic functions
8.2 Holding brake control
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
8.2.1 Parameter setting

How to go to the parameterisation dialog of the holding brake control:
1. »Engineer« Go to the Project view and select the 8400 motec controller.
2. Select the Application parameters tab from the Workspace.
3. Go to the Overview dialog level and click the "Basic functions" button.
4. Go to the Overview  Basic functions dialog box and click the Holding brake control button.
Parameterisation dialog in the »Engineer«

Danger!
A faultless brake control function requires a correct setting of the different deceleration
times in the following parameters!
A wrong setting of the delay times can cause a faulty control of the brake!