Lenze 8400 motec - Manual (Page 298)

9 Diagnostics & error management
9.8 Error messages of the operating system
298 Lenze · 8400 motec · Reference manual · DMS 4.1 EN · 08/2013 · TD05
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
9.8.1.2 Error subject area
The error subject area indicates the internal "function unit" of the controller in which the error has
occurred:
9.8.1.3 Error ID
16-bit value (0 ... 65535) for error identification within the error subject area.
Error subject area Assigned errors Remedy possible by
user?
No. Name
111 Supply voltage Errors that occur in connection with the supply voltage of the device. Yes
119 Temperature Errors that occur for temperature reasons. Yes
123 Motor management / encoder Errors that occur within the motor control or encoder evaluation. Yes
125 Analog I/O Errors that occur in connection with the analog inputs and outputs. Yes
127 Communication unit Errors reported by the communication unit and communication er-
rors to the communication unit.
Yes if it is a fieldbus error.
131 CAN general Errors related to general CAN functions. Yes
135 CAN PDO Errors that are explicitly only related to the CAN-PDO (process data
objects).
Yes
140 Device configuration Errors that occur due to incompatibilities of the plugged-in individual
components (drive unit, communication unit).
Yes
144 Parameter set Errors that occur in connection with the parameter set or the param-
eter set memory (memory module).
Yes if the error relates to a
missing or incompatible
memory module.
145 Device firmware (internal error) Internal error of the device firmware. No
400 Defective device hardware Errors that occur due to defective device hardware. No
444 Fieldbus Errors that occur in connection with fieldbus communication. Yes
980 US01: User error 1 Errors generated by the user (by the application) via the
LS_SetError_1 system block.
Yes
981 US02: User error 2
Bit 16 25 26 31 0 15 29 30
Bit 16 25 26 31 0 15 29 30