Error log, Figure 65 – H3C Technologies H3C Intelligent Management Center User Manual
Page 127
113
Figure 65 Network Interface area layout
Network Interface area fields:
•
Interface Name—Identifier of a network interface card in AIX. APM monitors both physical and
virtual (logical) network interface cards.
•
Receive Rate—Receive rate of a network interface card in the last APM polling period.
Set Threshold—Click the Set Threshold icon
to set alarm thresholds for the receive rate of AIX
network interface cards. The data is highlighted in orange when the receive rate reaches the
level-1 threshold, and is highlighted in red when the receive rate reaches the level-2 threshold. Use
the global thresholds or custom thresholds. For information about setting the thresholds, see "
."
•
Send Rate—Send rate of a network interface card in the last APM polling period.
•
Input Error Packet Rate—Number of lost inbound error packets per second on a network interface
card in the last APM polling period.
•
Output Error Packet Rate—Number of lost outbound error packets per second on a network
interface card in the last APM polling period.
Error Log
APM examines the AIX error logs during polling and displays the first 10 error logs obtained in the AIX
application monitor report. The Error Log area layout is shown in
.
Figure 66 Error Log area layout
Error Log area fields:
•
Time—Time when the error occurred.
•
Log—Content of the error log.
•
More—Click More to view all error logs in last polling of the AIX system.