H3C Technologies H3C Intelligent Management Center - Manual (Page 513)

499
− Username—Enter the SSH username. The user must have the operating system
administrator's privilege.
− Password—Enter the password of the SSH user.
− Private Key File—Enter the directory of the SSH private key file or browse to the file.
− Private Key Password—Enter the password to decrypt the SSH private key file.
− Super Password—Enter the super password with which an SSH user can elevate privileges
after login.
− Port—Enter the SSH port on the operating system.
− Timeout (1-120 seconds)—Enter the maximum time period that APM waits for an SSH
response from the operating system. The value range is 1 to 120 seconds and the default is
10 seconds. If no SSH response is received from the operating system within the timeout time,
APM considers the interaction a failure.
− Retries (1-5)—Enter how many times APM retries to send SSH packets to the operating
system host.
Telnet parameters
− Edit Telnet Parameters—Select this option if you want to manually configure Telnet
parameters for APM. Make sure the Telnet settings are the same as those on the operating
system where the directory is located.
− Select an Existing Template—Select this option if you want to select an existing Telnet
template for APM. For information about setting Telnet parameter templates, see H3C IMC
Base Platform Administrator Guide.
− Authentication Mode—Select the authentication mode for Telnet users. Options include
Password (No Operator or Super/Manager), Username + Password, Super/Manager
Password, Password + Super/Manager Password (No Operator), Username + Password +
Super/Manager Password, No Username + No Password, and Username + No Password.
The following parameters to be configured vary with authentication modes.
− Username—Enter the Telnet username. The user must have the operating system
administrator's privilege.
− Password—Enter the password of the Telnet user.
− Super Password—Enter the super password with which a Telnet user can elevate privileges
after login.
− Timeout (1-60 seconds)—Enter the maximum time period that APM waits for a Telnet
response from the operating system. The value range is 1 to 60 seconds and the default is
4 seconds. If no Telnet response is received from the operating system within the timeout
time, APM considers the interaction a failure.
WMI parameters
− Username—Enter the username of the Windows administrator.
If the administrator is a domain user, use domain name\username.
If the administrator is a local user, use host name\username or IP address\username, or
use username.
− Password—Enter the password of the administrator.
{
Directory Name—Modify the absolute path and name of the directory you want to monitor. Use
the C:\Windows format for Windows, or the /home/Apache format for Linux and UNIX.
{
Contact—Modify the contact information, such as name, email address, and telephone number.
The default is the username of the operator who created the application monitor.