H3C Technologies H3C Intelligent Management Center - Manual (Page 156)

142
3. Click the link naming the desired FreeBSD application monitor.
The FreeBSD monitor report appears, as shown in
Figure 88 . For information about the icons in the
monitor report, see " 2 Quick start ." This section describes the fields in each area of the monitor
report.
Figure 88 Part of a FreeBSD application monitor report
Monitor Information
The Monitor Information area layout is shown in Figure 89 .
Figure 89 Monitor Information area layout
Monitor Information area fields:
• Name—Application monitor name.
• Health State—Health status of the monitored FreeBSD application.
• IP Address—IP address of the FreeBSD host.
• Application Type—Type of the monitored application, which is always FreeBSD.
• Version—Version of the FressBSD operating system.
• Last Polling Time—Time when APM last polled the FreeBSD application.
• Relationship—Click the Relationship icon to view dependencies between the FreeBSD
application and other applications in a dependency topology view. For more information about
dependency topologies, see " 4 Topology and application group management ."
• Top5 Unrecovered Alarms—Latest five unrecovered alarms on the FreeBSD host. The alarm level is
identified by color: yellow for minor alarms, orange for major alarms, and red for critical alarms.
If no alarm is generated by FreeBSD, this field does not appear.
Availability Today
Figure 90 shows the Availability Today area layout.