H3C Technologies H3C Intelligent Management Center - Manual (Page 385)

371
1. Click the Resource tab.
2. Enter the Add Application page in one of the following ways:
{
Select Application Manager > Add Application from the navigation tree.
The page displays all application types that can be monitored by APM.
{
Select Application Manager > Application Monitor from the navigation tree, and click Add on
the application monitor list page.
3. Click WebSphere Server of the Application Server Monitor class.
The page for adding a WebSphere server application monitor appears.
4. Configure the following parameters:
{
IP Address—Enter the IP address of the host on which the WebSphere server to be monitored
resides. If the host is already added to the IMC platform, you can also click Select and select the
host in the Select Devices window. For information about selecting a host, see " 2 Quick start ."
APM automatically checks the specified IP address and associates the application monitor with
the host managed in the IMC platform.
{
Name—Enter a unique application monitor name. H3C recommends using Application
name_host IP address for naming the application monitor.
{
Description—Enter a description for the application monitor.
{
Application Monitor Port—Enter the port used by the SOAP service.
{
Traffic Collection Port—Enter the service port number of the WebSphere server. This field
appears only when at least one probe is configured for APM.
{
Polling Interval (min)—Select a polling interval for the application monitor. Available options
include 1, 2, 3, 4, 5, 10, 20, and 30. The default polling interval is 5 minutes. A shorter polling
interval provides more accurate real-time data consumes more system resources.
{
Username/Password—Enter the username and password used to access the SOAP service if
the service requires authentication.
{
Contact—Enter contact information, such as name, email address, and telephone number. The
default is the username of the operator who created the application monitor.
{
Related Applications—Add the application that the WebSphere server depends on. Enter the
complete or part of the application monitor name in the Search field at the top of the window,
and click Search. Select the application that the WebSphere server depends on, and then click
OK.
Operating system applications, such as Windows, AIX, SCO UNIX, FreeBSD, OpenBSD,
HP-UX, Solaris, Mac OS, and Linux, cannot be selected. Operators can view all dependencies
of the application in the dependency topology. APM automatically adds the dependencies
between the WebSphere server and operating system applications by IP address and displays
their dependencies in the application topology.
{
Detect Application—Select this parameter if you want to enable application detection.
Application detection enables APM to verify connection to the application by using the previous
parameter settings, and to determine whether to add the application monitor based on the
verification result. APM adds the application monitor only when it can connect to the
application. When this parameter is not specified, APM adds the application monitor without
verifying the connection.
5. Click OK.