Selecting devices, Sorting a list – H3C Technologies H3C Intelligent Management Center User Manual
Page 28
14
{
Device Status—Select a device state from the list.
{
Device Category—Select a device type from the list.
{
Device Series—Select a device series from the list.
{
Contact—Enter partial or complete contact information for devices. For example, if you enter
Bob, all devices whose contact information contains Bob are queried.
{
Location—Enter partial or complete location information for devices. For example, if you enter
lab, all devices whose location information contains lab are queried.
{
Device Reachability—Select a reachability state from the list: Reachable or Unreachable.
Empty fields are ignored.
3.
Click Query.
All matching devices are displayed in the Devices Found area.
Selecting devices
1.
Add devices to the Selected Devices area:
{
To add one or more devices, select the devices in the Devices Found area and click the Add icon
.
{
To add all devices, click the Add all icon
.
2.
Remove undesired devices from the Selected Devices area:
{
To remove one or more devices, select the devices in the Selected Devices area and click the
Remove icon .
{
To remove all devices, click the Remove all icon
.
3.
Click OK.
NOTE:
•
If less than two devices are found, the window does not include the Add all icon
and the Remove
all icon
.
•
To select multiple devices, press Ctrl when you select the devices.
Sorting a list
If a list contains a large number of items (as shown in
), use the following aids to navigate the list:
•
Select 8, 15, 50, 100, or 200 at the lower right of the list to set the number of items you want to
display per page.
•
Click the Next Page icon
to page forward in the list.
•
Click the Last Page icon
to page forward to the end of the list.
•
Click the Previous Page icon
to page backward in the list.
•
Click the First Page icon
to page backward to the front of the list.
•
Click a page number to display the specified page.