H3C Technologies H3C Intelligent Management Center - Manual (Page 134)

120
− Private Key Password—Enter the password to decrypt the SSH private key file.
− Super Password—Enter the super password with which an SSH user can elevate privileges
after login.
− Port—Enter the SSH port on SCO UNIX.
− Timeout (1-120 seconds)—Enter the maximum time period that APM waits for an SSH
response from SCO UNIX. The value range is 1 to 120 seconds and the default is 10
seconds. If no SSH response is received from SCO UNIX within the timeout time, APM
considers that the interaction has failed.
− Retries (1-5)—Enter how many times APM retries to send SSH packets to the SCO UNIX host.
Telnet parameters
− Edit Telnet Parameters—Select this option if you want to manually configure Telnet
parameters for APM. Make sure the Telnet settings are the same as those on SCO UNIX.
− Select an Existing Template—Select this option if you want to select an existing Telnet
template for APM. For information about setting Telnet parameter templates, see H3C IMC
Base Platform Administrator Guide.
− Authentication Mode—Select the authentication mode for Telnet users. Options include
Password (No Operator or Super/Manager), Username + Password, Super/Manager
Password, Password + Super/Manager Password (No Operator), Username + Password +
Super/Manager Password, No Username + No Password, and Username + No Password.
The following parameters to be configured vary with authentication modes.
− Username—Enter the Telnet username. The user must have the SCO UNIX administrator's
privilege.
− Password—Enter the password of the Telnet user.
− Super Password—Enter the super password with which a Telnet user can elevate privileges
after login.
− Timeout (1-60 seconds)—Enter the maximum time period that APM waits for a Telnet
response from SCO UNIX. The value range is 1 to 60 seconds and the default is 4 seconds.
If no Telnet response is received from SCO UNIX within the timeout time, APM considers that
the interaction has failed.
{
Contact—Modify the contact information, such as name, email address, and telephone number.
This field is available only when you select Disable from the Use Template list.
{
Related Applications—Click Add next to this filed. On the Select Application dialog box that
appears, select the application that the SCO UNIX depends on.
− Enter the complete or part of the application monitor name in the Search field at the top of
the page, and click Search.
− Select the application that the SCO UNIX depends on.
− Click OK.
Operating system applications, such as Windows, AIX, SCO UNIX, FreeBSD, OpenBSD,
HP-UX, Solaris, Mac OS, and Linux, cannot be selected. Operators can view all dependencies
of the application in the dependency topology.
To remove the relationship between SCO UNIX and the specified application, select the
application in the Related Applications field, and then click Delete.
{
Detect Application—Select this parameter if you want to enable application detection. APM
verifies the application connectivity by using the previous parameter settings, and adds the