H3C Technologies H3C Intelligent Management Center - Manual (Page 67)

53
5 APM agent management
An APM agent collects application index data from a target host in local monitor mode. Using an agent
to collect data can secure the OS privileges and obtain data that cannot be obtained in remote monitor
mode.
Installing and upgrading an APM agent
Make sure the APM agent deployed o the same version as APM. You can install and upgrade an APM
agent locally and remotely.
Installing an APM agent locally
To install an APM agent locally, operators must download the installation package (for Windows or Linux)
to the local directory by using agent management.
To install an APM agent locally:
1. Click the Resource tab.
2. From the navigation tree, select Application Manager > Agent Management.
3. Click Download.
4. Select Agent Package (Windows) or Agent Package (Linux) as needed.
The installation package is saved to the local directory.
5. Copy the installation package to the destination host by using FTP, file sharing, or SCP, and
decompress it.
6. Double-click the install.bat script and enter the IP address of the IMC server as prompted.
If IMC is deployed in distributed mode, enter the IP address of the master server.
7. Click OK.
Installing an APM agent remotely
This function uses WMI (Windows) or SSH (Linux) on the destination host. To install an APM agent
remotely, you must obtain the IP address of the destination host and administrator username and
password.
To install an APM agent remotely:
1. Click the Resource tab.
2. From the navigation tree, select Application Manager > Agent Management.
3. Click Install.
4. Configure the following parameters:
{
Destination Host IP—Enter the IP address of the destination host and click Add. The IP address
is added to the Host List area.