H3C Technologies H3C Intelligent Management Center - Manual (Page 310)

296
Sybase
Sybase is an IBM Corporation developed DBMS. The performance and stability can impact the service
applications directly, so APM supports the monitor function to Sybase.
Adding a Sybase application monitor
APM monitors the Sybase application through the port. When you add application monitors for Sybase,
follow these guidelines:
• Add Sybase hosts to the IMC platform so APM can obtain and display network connections of the
hosts and their access devices in the application topology. For more information about adding hosts
to the IMC platform, see H3C IMC Base Platform Administrator Guide.
• Obtain the correct username and password of the user who has the Sybase administrator's
privileges.
• To view traffic statistics in the monitor report of the Sybase application, make sure at least one probe
is configured in APM. After a Sybase application monitor is added, APM sends the IP address and
service port of the monitored Sybase application to the probes for traffic collection.
To add a Sybase application monitor:
1. Click the Resource tab.
2. Enter the Add Application page in one of the following ways:
{
Select Application Manager > Add Application from the navigation tree.
The page displays all application types that can be monitored by APM.
{
Select Application Manager > Application Monitor from the navigation tree, and then click Add
on the application monitor list page.
3. Click Sybase of the Database Server Monitor class.
The page for adding a Sybase application monitor appears.
4. Configure the following parameters:
{
IP Address—Enter the IP address of the host on which the Sybase application to be monitored
is installed. If the host is already added to the IMC platform, you can also click Select and select
the host in the Select Devices window. For information about selecting a host, see " 2 Quick
start ." APM automatically checks the specified IP address and associates the application
monitor with the host managed in the IMC platform.
{
Name—Enter a unique application monitor name. H3C recommends using Application
name_host IP address for naming the application monitor.
{
Description—Enter a description for the application monitor.
{
Application Monitor Port—Enter the port number for the application monitor. The default port is
TCP 5000.
{
Traffic Collection Port—Enter one or more service port numbers for Sybase. To set multiple ports,
separate the port numbers by commas. This field appears only when at least one probe is
configured for APM.
{
Polling Interval (min)—Select a polling interval for the application monitor. Available options
include 1, 2, 3, 4, 5, 10, 20, and 30. The default polling interval is 5 minutes. A shorter polling
interval provides more accurate real-time data but consumes more system resources.
{
Username—Enter the username of the Sybase administrator.